1
Completed front panel.

2
Another view.

3
Front view of the entire box.

4
Looking into the meter compartment from the top.

5
Inside the box showing the tube mounted, the mid panel and the rear panel.

6
Inside the front panel showing the turns counters

7
Inside the compartment for all the controls etc.

8
Closeup of the rear of the digital meter, band switch, LED board and control switches.

5
Another closeup of the controls

6
The tube mounted with chimney in place. Air exits through the slots behind the tube.

7
Left front corner showing the perforated metal cover on the left side.

8
The rear panel. The blower goes on an adapter plate which will cover the rectangular cutout for the cathode compartment.

9
Cathode compartment access is from the bottom.

10
Closeup of the cathode compartment.

11
I made new meter faces for the three Triplett analog meters.

12
The new face is in place and I am replacing the clear plastic front.

13
The completed Plate Volts meter.

14
The completed Grid Current meter

.
15

.
16